Product
Contact us
Sales manager：Tom Zhan
Tel:+0086 13632658537
Skype: zxp94520181
Whatsapp :+86 13632658537
Wechat: zxp94520181
Email：tom.zhan@primeda-telecom.com
www.primeda-telecom.com
Video/Audio/Ethernet/Data
Video Network POTS Fiber converter
PMD-1V1D1E1T-FC-SM
This model is multifunctional Analog video/Pots telephone/RS485 data/10/100Mbps Ethernet over a fiber optic media converters, Singlemode simplex fiber up to 20Km, compatible with multimode fiber up to 500meters.
Video bnc port for analog cameras,RJ11 port for pots telephone, Rj45 port for 10/100Mbps Ethernet which can be applicable for extending computer networking, as well as applicable for IP cameras with RJ45 connector. Green terminal block port is bidirectional RS-485 data for remote cameras control .
Custom made is acceptable. Contact us if you have special requirements
(additional function is optional: 1-8 channel video, 1-16 channels Contact closure,RS485/422/232 and more)
Product Function:
1x Network 10/100Mbps rj45.
1x Pots telephone RJ11
1x Analog video BNC
1x RS485 bi-directional
FC fiber connector, simplex fiber single mode 0- 20Km.
AC100-240V,DC5V2A
Video:
Video connector: BNC
Video format compatible for PAL, NTSC, SECAM (for analog camera only)
Mean Time between failures: More than 100,000 hours
Input / output impedance: 75 Ω (unbalanced)
Input / output voltage: typical 1Vpp (peak-to-peak), maximum 1.2Vpp
Bandwidth: 8MHz
Sampling: 15MHz high speed sampling
Digital Bit Width: 8/10/12 bits (bits)
Differential gain: (10% -90% APL) DG <1% (typical)
Differential phase: (10% -90% APL) DP <0.8 degree (typical)
Field tilt: <0.5%
Video signal to noise ratio (weighted): S / N ≥ 70dB (maximum optical link loss)
Pots Telephone specifications:
1. Voice coding: PCM coding, 64Kbps per voice
2. Crosstalk attenuation: ≥65dB
3. Balanced noise: ≤63.7dBmop
4. Insertion loss: -3 ± 0.75dB
5. Frequency characteristics: 300 to 3400 Hz (-0.6 to +3 dB)
6. Relay port (FXO): connected to the switch
7. Two-wire AC input impedance: 200+680//0.1 Ω (three components)
8. Ringing voltage: 35 ~ 150V
9. Ringing frequency: 17~60HZ
10. Return loss: 20 db
11. User Interface (FXS): Connect to the user's telephone
12. Two-wire AC input impedance: 200+680//0.1 Ω (three components)
13. User line loop resistance: less than 1KΩ (including phone)
14. Ringing voltage peak-to-peak value: 110~150V
15. Ringing frequency: 22~28HZ.
16.Feed voltage: 28V
17.Feed current: 20~50mA;
18.Return loss: 20 db
19.Bell flow: AC90 plus or minus 15V
Data :
RS-485 (2 wires), Bi-directional
Connector: Terminals block
Ethernet:
Interface rate: 10 /100Mbit/s adaptive, the default is 100Mbps working state
Interface type: UPC Cat5 cable RJ-45
Support Protocol: IEEE 802.3U 100Base-TX, 10 / 100M Ethernet standard
Work mode: full duplex or half duplex
Fiber optic :
Optical Interface : FC
Wavelength : Single-mode 1310/1550μm (9/125μm).
Transmission distance:.Singlemode up to 20Km,Multimode up to 500meters
Power supply: AC100~240V, DC5V/2A
Package:
1x Video Fiber Transmitter
1x Video Fiber Receiver
2x Power supply adapters (US/EU/AU/UK standard is optional)
1x User manual
Custom made is acceptable. Contact us if you have special requirements
(additional function is optional: 1-8 channel video, 1-16 channels Contact closure,RS485/422/232 and more)
Product Function:
1x Network 10/100Mbps rj45.
1x Pots telephone RJ11
1x Analog video BNC
1x RS485 bi-directional
FC fiber connector, simplex fiber single mode 0- 20Km.
AC100-240V,DC5V2A
Video:
Video connector: BNC
Video format compatible for PAL, NTSC, SECAM (for analog camera only)
Mean Time between failures: More than 100,000 hours
Input / output impedance: 75 Ω (unbalanced)
Input / output voltage: typical 1Vpp (peak-to-peak), maximum 1.2Vpp
Bandwidth: 8MHz
Sampling: 15MHz high speed sampling
Digital Bit Width: 8/10/12 bits (bits)
Differential gain: (10% -90% APL) DG <1% (typical)
Differential phase: (10% -90% APL) DP <0.8 degree (typical)
Field tilt: <0.5%
Video signal to noise ratio (weighted): S / N ≥ 70dB (maximum optical link loss)
Pots Telephone specifications:
1. Voice coding: PCM coding, 64Kbps per voice
2. Crosstalk attenuation: ≥65dB
3. Balanced noise: ≤63.7dBmop
4. Insertion loss: -3 ± 0.75dB
5. Frequency characteristics: 300 to 3400 Hz (-0.6 to +3 dB)
6. Relay port (FXO): connected to the switch
7. Two-wire AC input impedance: 200+680//0.1 Ω (three components)
8. Ringing voltage: 35 ~ 150V
9. Ringing frequency: 17~60HZ
10. Return loss: 20 db
11. User Interface (FXS): Connect to the user's telephone
12. Two-wire AC input impedance: 200+680//0.1 Ω (three components)
13. User line loop resistance: less than 1KΩ (including phone)
14. Ringing voltage peak-to-peak value: 110~150V
15. Ringing frequency: 22~28HZ.
16.Feed voltage: 28V
17.Feed current: 20~50mA;
18.Return loss: 20 db
19.Bell flow: AC90 plus or minus 15V
Data :
RS-485 (2 wires), Bi-directional
Connector: Terminals block
Ethernet:
Interface rate: 10 /100Mbit/s adaptive, the default is 100Mbps working state
Interface type: UPC Cat5 cable RJ-45
Support Protocol: IEEE 802.3U 100Base-TX, 10 / 100M Ethernet standard
Work mode: full duplex or half duplex
Fiber optic :
Optical Interface : FC
Wavelength : Single-mode 1310/1550μm (9/125μm).
Transmission distance:.Singlemode up to 20Km,Multimode up to 500meters
Power supply: AC100~240V, DC5V/2A
Package:
1x Video Fiber Transmitter
1x Video Fiber Receiver
2x Power supply adapters (US/EU/AU/UK standard is optional)
1x User manual
- Online Service
-
