Feature:
1. This unit can extend 8 channel HD Video signal through a fiber optic cable to remote display. Long transmission distance up to 20Km by single-mode fiber. Broadcast-quality, Uncompressed real-time transmission.
2. Applicable for 5MP/4MP/3MP/2MP HD TVI/CVI/AHD Cameras, and compatible with 960P/720P TVI/CVI/AHD and analog camera.
3. Suitable fiber type: universal Single-mode. Equipped with FC optical connector. With RS-485 data (reverse direction) which can remotely control PTZ.
4. LED indicators can dynamic feedback link connection state and fault detection to easily monitor network status.
5. Plug and Play, No need to set up.



Support Cameras:
TVI: 5MP/4MP/3MP/2MP 1080P (1920×1080), 960P (1280×960), 720P (1280×720)
CVI: 5MP/4MP/3MP/2MP 1080P (1920×1080), 960P (1280×960), 720P (1280×720)
AHD: 5MP/4MP/3MP/2MP 1080P (1920×1080), 960P (1280×960), 720P (1280×720)
Analog cameras (PAL, NTSC, SECAM format)



Optical:
1. Optical connector: FC (SC/ST is optional).
2. Fiber type: universal single mode, single fiber(default).
3. Working distance: single singlemode fiber 0-20Km.(Optional 40km, 60km, 80km custom made)


Video:
1. Number of Channels: 8 (1/2/8/16 optional) .
2. Support camera type: 3 megapixel, 4 megapixel, 5 megapixel HD TVI/CVI/AHD video .
3. Input/output impedance: BNC 75 ohm (unbalance).
4. Video bandwidth: 30MHz(720P); 60MHz(1080P);150MHz(1960P) .              
5. Video input level: >500mVp-p.
6. Video output level: 1Vp-p.
7. SNR:  >60dB (8 bit).
8. Connector:  BNC.
9. Operating Voltage: DC 5V2A.
10. Operating Temperature : -10 degree C to +75 degree C.
11. Storing Temperature : -40 degree C to +85 degree C.
13. Humidity: 0 to 95% Non-condensing.
14. MTBF: >= 100000Hours.
RS-485 Data (optional)
1. Reverse direction, for remote control PTZ cameras.
2. Connector: industry terminal.
3. Baud Rate : 1200-9600bit/s.
4. BER: less than 10-9.

LED indicators:
1. PWR light: After power on, light on, cut off the power, lights off.
2. Data light:  Light on when optical signal received, Lights off when no signal pass.
3. Fiber light:  when connect fiber optic between TX and RX, fiber light on. Light off when no fiber signal pass.
4. V1-V4 light: Video input. light on when have video signal pass. light off no video pass.


Package list:
1 x Video Transmitter
1 x Video Receiver             
2 x External power adapters       
1 x User manual