Features  

1. Smooth deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation.

2. Clear sleeve make it easy to detect splice before shrinkage.

3. Easily use and avoid any damages to the optical fiber during installation.

4. Operating temperature ranging from -45°C to 100°C.

5. Minimum fully recovery temperature :  120 °C  .

6. Strength member is made of "Full hard" stainless steel of 304 grade and is ground at the edges before polishing to make it completely burr free to avoid rupturing during shrinking. 304 grade gives better corrosion resistance, even in coastal environment.

7. Resistant to heat shocks, no cracking dripping or flowing.

 

Fiber Optic Fusion Splice Protection Sleeves

Part No.	L	Lp	D(OD after recovery)	Dp(Steel needle OD)	d(Hole ID before recovery)	Steel needle grade	Color	Regular stock
GT-60A	60	54	3.0+/-0.1	1.5	1.3	304	clear	√
GT-45A	45	40	3.0+/-0.1	1.5	1.3	304	clear	√
GT-40A	40	35	3.0+/-0.1	1.5	1.3	304	clear	√
GT-60B	60	54	2.5+/-0.1	1.2	1.5	304	clear	√
GT-45B	45	40	2.5+/-0.1	1.2	1.5	304	clear	√
GT-40B	40	35	2.5+/-0.1	1.2	1.5	304	clear	√
GT-60C	60	54	2.4+/-0.1	1.0	1.5	304	clear	√
GT-45C	45	40	2.4+/-0.1	1.0	1.5	304	clear	√
GT-40C	40	35	2.4+/-0.1	1.0	1.5	304	clear	√

Remark:
Special size available to custom made. All dimensions in mm.
L - Length after recovery
Lp - Pin length
D - Outer diameter after recovery
Dp - Steel Pin diameter
d - Hole diameter before recovery
Packing: 100pcs per bag.