80Km 1080p HD Video over Fiber Optic Converter FPV Drone module UART TTL SBUS to Optic Controller FC/UPC SingleMode TX/RX 1270/1330nm

Product Function

2x1080P HD Video

2x TTL (Up to 460.8Kb/s)

FC/UPC ,Singlemode fiber up to 80km

Input voltage: DC5.5-26V

Product description:

This fpv optical module include a sky end (TX/1270nm) and a ground end (RX/1330nm), Developed for drone signal transmission system with 2 channels of 1080P HD video and 2 TTL level signal over a fiber cable for long distance transmission up to 80km. High speed and stable transmission, Anti-interference.

Widely used in various scenarios that require long-distance, high-quality video transmission, such as telecommunications, power, monitoring, industrial control, and other fields

It is safe and reliable, stable in performance, light in weight and cost-effective. It can be customized according to buyer's special requirements. Contact us if needed.

Interface：RX/TX/AV/VCC/GND

GND: Ground wire

VCC: Power Supply

V1: Video 1

V2: Video 2

TX: TTL output

RX: TTL input

Product specification:

Support camera type: 1080P HD Camera, Backward compatible with 960P/720P and Cvbs analog camera.

Video format compatible for PAL, NTSC, SECAM

TTL speed: High speed up to 460.8Kb/s, backward compatible with 420Kb/s, 230.4Kb/s,115.2Kb/s and more

LED lights monitoring status can provide rapid indication of operating parameters.

Optical Interface: FC/UPC

Fiber Wavelength: TX1270nm/RX1330nm  

Transmission distance: 80Km

Power Supply: 5.5V-26V: (2S-6S Battery)

Power Consumption: Less than or Equal to 5W

Communication Interface: MX-SH1.0mm-5Pin: CRSF Interface/CVBS video port

Others:

Sky end TX size: 70x65mm (LxWxH)

Ground end TX size: 60x40mm (LxWxH)

Net weight: 12g/Sky End, 14g/Ground End  

Sky terminal

Fiber Wavelength: TX/1270nm  

Interface : RX/TX/AV/VCC/GND

RX is connected to the flight control's CRSFTX,

TX is connected to the flight control's CRSFRX,

AV is connected to the flight control's AV signal output port,

155M 1310nm 20km

VCC power supply voltage is 5.5V~26V

Ground terminal

Fiber wavelength: RX/1330nm

Interface : RX/TX/AV/VCC/GND

RX is connected to the CRSFTX of the remote control receiver,

TX is connected to the CRSFRX of the remote control receiver,

AV is output to the AV signal input port of the display or VTX,

VCC power supply voltage is 5.5V~26V

LED lights indicator:

1:TTL LED light is always on after power on

2: Video light video connected after the light is always on

3: Fiber light connected to the optical fiber after the light is always bright

4: The power light is always on after the power light is energized.

After the optical terminal equipment is powered on, the power lamp and TTL lamp are always on;

After the optical fiber link at the sky end and the ground end is connected, the light lamp is always on;

After the video signal at the sky end is connected, the video lights at the sky end and the ground end are always on;

After all 4 indicator lights are on, the signal of the equipment is connected normally.