1080P Video over Fiber Transceiver TTL UART SBUS Optical Module for FPV Drone FC/UPC Singlemode 20Km 40Km 60Km 80Km

Product function:

1 x 1080P AHD/CVI/CVI Video (backward compatible with 960P/720P/CVBS)

1 TTL signal

Power supply: 5.5V-26V

FC/UPC, Singlemode 20Km/40Km/60Km/80Km

Description:

The TTL optical module is developed for UAV signal transmission system with 1 channel 1080P video and 1 high speed TTL level signal. The device has the features of safety and reliability, stable performance, overall light weight, cost-effective and so on.

Application Scenario: FPV remote control, emergency rescue communication, power line inspection, border patrol monitoring, tunnel/underground pipeline inspection and more

Product features:

1.Long communication distance up to 20Km/40Km/60Km/80Km transmission by an optical fiber cable, Zero loss of long-distance signal, suitable for FPV control.

2.Wide voltage power supply 5.5V-26V, compatible with a variety of batteries to ensure stable work, suitable for drones.

3.Lightweight design: compact size design, reducing the burden on equipment and improving flight efficiency.

4.Dual-wavelength fiber optic communication: 1310nm at the sky end and 1550nm at the ground end, guaranteeing the signal transmission quality. Special wavelength like 1270/1330nm, 1490/1550nm etc can be customized.

5.Multiple indicator monitoring: power, fiber optic, video, data status indication can monitor the operating status of the system.

Specification:

Video format: support 1080P AHD/CVI/CVI, backward compatible with 960P/720P/CVBS.

Power Supply: DC 5.5V-26V

Power Consumption: ≤5W

Optical module: FC/UPC interface, 1.25Mbps.

Ethernet Port: RJ-45 Connector, Available speed: auto-detective 10/100Mbps. Full-Duplex and Half-Duplex auto-negotiation.

Communication distance: Max. 20Km/40Km/60Km/80Km

LED Indicator Lights: Power Indicator, Fiber Optic Indicator, Video Signal Indicator, Data Indicator

TTL speed: Up to 460.8Kb/s, backward compatible with 420Kb/s, 230.4Kb/s,115.2Kb/s and more

Board Size: Sky unit :50x29x12.5mm, Ground unit :50x29x12.5mm

Net weight: 12.5g/pcs.

Operating Temp: Industrial grade (-40°C to +85°C)

Sky unit:

Fiber Wavelength: TX/1310nm 

Interface : RX/TX/AV/VCC/GND

RX is connected to the flight control's CRSFTX,

TX is connected to the flight control's CRSFRX,

AV is connected to the flight control's AV signal output port,

155M 1310nm 20km

VCC power supply voltage is 5.5V~26V

Ground unit:

Fiber wavelength: RX/1550nm

Interface : RX/TX/AV/VCC/GND

RX is connected to the CRSFTX of the remote control receiver,

TX is connected to the CRSFRX of the remote control receiver,

AV is output to the AV signal input port of the display or VTX,

VCC power supply voltage is 5.5V~26V

Precautions:

1. Please note that the power supply voltage should not exceed 26V, otherwise there is a risk of burnout.

2. Please take note that the minimum voltage should not be less than 5V, otherwise the chip of the board may not work properly.

Package include:

1x Sky unit 1310nm optical module 

1x Ground unit 1550nm optical module 

With high quality Silicone cable is optional, wires picture below, if buyer have request, please contact us before order.